Cyclone spray tower is also called cyclone tower, mixed swirl tower and cyclone spray device. QX series cyclone spray tower is embedded with "pneumatic mixed flow exhaust gas purification system" on the basis of ordinary spray painting water curtain cabinet. The system is designed according to the principle of technical and dynamic technology, mainly for viscous dust, oily dust industrial waste gas pretreatment, fiber dust and other dry dust removal equipment can not handle the working conditions and the development of a new warm and efficient environmental protection waste gas purification equipment.

A spray tower, also known as a spray scrubber, is an absorption tower containing packing or plates and equipped with nozzles. Liquid enters from the top of the tower and is sprayed into a mist or droplets by the nozzles; gas enters from the bottom of the tower and comes into close contact with the mist or droplets of liquid for mass transfer, allowing the easily soluble components in the gas to be absorbed. It has a simple structure, is not easily blocked, has low resistance, and is easy to operate and maintain.

The equipment that separates the dust from the flue gas is called a dust collector or dust removal equipment. The performance of the dust collector is expressed in terms of the amount of gas that can be processed, the resistance loss when the gas passes through the dust collector, and the dust removal efficiency. At the same time, the price of the dust collector, the cost of operation and maintenance, the length of service life and the difficulty of operation and management are also important factors to consider its performance. Dust collector is a common facility in boiler and industrial production.

The product is made of PP, RPP, FRPP and other different polypropylene polymer material plate welding. Polypropylene material has corrosion resistance, no scaling, leakage resistance, impact resistance, small expansion coefficient, can meet the pickling, electroplating, electrolysis, phosphating and other reaction tank working conditions process requirements. Plastic plates with different thicknesses can be selected according to different volumes. Parameters such as the size of the groove body can be customized according to customer requirements. The outer groove edge of the large groove body can also be welded with steel frames to strengthen the groove body to increase stability.